SDR receiver + CW Transmitter

Hi, This project is realized idea from LZ1VF (My friend Valeri) . I want to make something equal - Chinese pre-build RTL SDR HF receiver (for $26.88) with new/different transmitter section based on my before projects - especially last transmitter stage from Forty2 (French QRP project). I will add modified arduino sketch - The Peppermint Bark BITX40 VFO , from KC1FSZ  (also will add Si570 support - I'm still have unused one, and other staff). This sketch have Yaesu FT-817 emulation to connect arduino with many HAM software like N1MM+ , fldigi and other.

Receiver will be this RTL SDR:
100KHz-1.7GHz full band UV HF RTL-SDR USB Tuner Receiver/ R820T2+8232 Ham Radio

 

Transmitter:

RF amplifiers with LPF for 20m (14 MHz - this is my target band for day activity):

Arduino control (like PA0RWE schema without buttons - I don't need if control freq from notebook). This will be simple QRP transceiver, for mobile work, from My car:
 

TXOscillator is ready. Now Arduino is connected with software. This example picture is with fldigi, but I'm tested also with N1MM+

The source code/sketch is ready in My github based on Bruce MacKinnon KC1FSZ , The Peppermint Bark BITX40 VFO.

ALL SOURCES AND SCHEMATICS:

https://github.com/LZ1DPN/SDR-cw-transmitter

73 ES MNI DX'es!LZ7DP

uBitx ver. KMK 2017

After 2nd build, I think that uBitx is not mine transceiver. I prefer to work on CW mode and this SSB wide receiver is not so good for me. Idea to use Si5351 is another mistake who will be revealed after months from all hams. TDA2822 is another mistake. In this way transceiver sounding very bad, digitally, noisy and I don't like it. I'm sell all pcb boards, and go away to next project.


This transceiver is Farhan's uBitx mod - 10 watts, easy to build, general coverage SSB/CW transceiver for HF bands. Pcb is made from CM2KMK 2017 mod version.

Video from first receive test:

How to reduce OLED display noise :-)

Last World RTTY contest with uBitx:

http://www.phonestack.com/farhan/ubitx/ubitx.html

 I found 1 mistake in PCB (capacitor is shorted in my pcb):

 Farhan's  uBitx schema:

They have some difference in transmission section - especially in RF driver and PA.
I found it original schema in French QRP transceiver Forty2 -  http://lpistor.chez-alice.fr/imagesite/radio/docs/Forty2-1.pdf

ALL SOURCES AND SCHEMATICS:   

https://github.com/LZ1DPN/uBitxKMK2017 


73 ES MNI DX'es! LZ7DP

CM2KMK 14 MHz SSB Transceiver

!!!UNDERCONSTRUCTION!!!
This transceiver have some problems and it's not good to build.

CM2KMK 20 m (14MHz) SSB transceiver in progress.

I don't use relay to switch VFO/BFO. I will make some changes in arduino code to switch frequencies in Si5351 CLK exits when press PTT.

Now I'm not ready with arduino code/sketch and work with github repository is in progress and not finished.

ALL SOURCES AND SCHEMATICS: 

https://github.com/LZ1DPN/CM2KMK20mSSBtrx/

Be aware ! This is not finished yet !

73 ES MNI DX'es!LZ7DP

LZ1DPN-CW3 14 MHz CW Transceiver

UNDERCONSTRUCTION!
I have some problems with DDS made from Si570. When connect transmitter
DDS becomes unstable. I will need more time , or redesign DDS with AD9833.

Front panel:

First module - VFO (freq. oscillator) and transceiver control:

Receiver module with NE602 mixers and crystal BFO:

Audio:

Receiver modules:

RF Transmitter 0.5W:

Enclosure (120x95x40):

Tests:

 

 First receive test:

SCHEMA (with 0.5W RF Power):
http://www.schematics.com/project/lz1dpn-cw3-swl-sw20-57798/

ALL SOURCES AND SCHEMATICS:  
https://github.com/LZ1DPN/LZ1DPN-CW3/ 


73 ES MNI DX'es!LZ7DP
 

MOBILE HF ANTENNA

HF all bands (minus 160m) mobile antenna.

Antenna as Inverted V with ~7,50 meters fish rod, and ~1,5 base (~8.00 m height):

The same antenna as Vertical with 1 counterpoise:

Construction:

 

Dimensions:

==================================================

dipole 3.530     = 20.21 m x 2     (66.29feetx2)

invV 3.530    = 19.194 m X 2    (62.975feetx2)

==================================================

dipole 7.040     = 10.13 m x 2     (33.24feetx2)

invV 7.040    = 9.624 m X 2    (31.575feetx2)

==================================================

dipole 10.130     = 7.04 m x 2     (23.1feetx2)

invV 10.130    = 6.69 m X 2    (21.945feetx2)

==================================================

dipole 14.030     = 5.084 m x 2     (16.68feetx2)

invV 14.030    = 4.83 m X 2    (15.845feetx2)

==================================================

73 ES MNI DX'es!LZ7DP

LZ1DPN-CW2 QRP Transceiver with Si5351

QRP transceiver LZ1DPN-CW2 for 3.5, 5, 7, 10 and 14 MHz CW operation. This transceiver is based on Small Wonder Labs SW 30/40 schematics. I also use parts from my other projects - EK1A homebrew copy LZ1DPN-CW1, with some changes in schematics and source code.

This is 5W QRP transceiver. Receiver work on all HF BANDS, but transmitter have band limitation from LPF and driver transistor BD139. RF amplifier from IRF510 is tested and worked well to 10W RF Power (on 10 and 7 MHz), but need more cooling, and power consumption is slightly high. Now transmitter is optimized and locked to 14MHz  with ~4-5W CEP RF power.

My temporary best DX QSO record with this transceiver on 7 MHz (my QTH locator is KN32SN) is: with EF8U - 4161km. EA8BMG - 4161km  (Gran Canaria Isle), EF0F, EF5T, EA5WU, EA1RKV - 2696km, EC5CR - 2695km (Spain),  MD0CCE - 2667km (Isle of Man), R70SRC - 2634km (Russia).

My last contest with this QRP transceiver from locator KN32SN:
"His Majesty The King of Spain CW Contest 2017"
https://concursos.ure.es/en/contests-search/?qrz=lz1dpn 

Homebrew copies of Small Wonder Labs SW20, and EK1A in my shack.

LZAFA ACTIVITY WITH THIS QRP - Summer 2017

SOME OLD PICTURES:

FIRST TEST:

SCHEMA:
http://www.schematics.com/editor/lz1dpn-cw2-3-54798/

ALL SOURCES AND SCHEMATICS: 

https://github.com/LZ1DPN/LZ1DPN-CW2

73 ES MNI DX'es!LZ7DP